• Aluminum radio plate bracket for mounting the Serpent 950/960/966 radio plate. Comes with fastening material.

• New for the Serpent 960 is this composite servo saver set with adjustable Ackerman. A direct replacement of the original servo saver, this new version allows the user to easily adjust the cars Ackerman through the use of inserts eliminating the need to remove the entire assembly.
  
• Apart from the simple adjustment between 4 possible Ackerman settings the servo saver lever itself has been adjusted where it connects to the servo ensuring a more level connecting arm and therefore more consistent steering action.

Complete set (4) of composite RCC shock absorber components.

• New version front bumper for 966/960. Made of almost unbreakable composite nylon, with new shorter aerodynamic design. Higher curved edges on rear side to prevent bending down during the race. The most outer lowered surfaces are very thin and can be cut out with a hobby-knife easily to influence steering. The bumper is shorter and the front is flatter to accommodate the low “noses” of the current bodyshells.
• Voorraad  3 x In Stock

• 1601
• Set van 10 galvaniseert  staal body-clips.
• Voorraad 20 x In stock

• Set of 20 ball joints in 6.0mm diameter. Replacement set for VETEQ pushrod ball-ends. Made of high-tensile composite material for increased wear resistance.
• 1660
• Voorraad 2 x In Stock

• 903260
• Pair of rear long body mount arms.
• Voorraad 1 x In Stock

Rear composite bodymount.

• Suitable for:
  
• Serpent 960 08 1/8 scale 4WD
  
• Serpent 966 1/8 scale 4WD EVO
  
• Serpent 966-e onroad 1/8
• Voorraad 2 x In Stock
  

• 903121
• Voorraad 4 x Unit In Stock

Front composite body mount plate for the Serpent 960/966

• Uppersupension bracket rear carbon rr 966
• Voorraad 2 x Units In Stock

• 903102
• Op voorraad 1 x In Stock

• 903195
• Suitable for:
  

• 903258
• Pair of rear upper wishbones.
• Voorraad 6 x In Stock

• 903261
• Suitable for:
  

• 903259
• Voorraad 2 x In Stock

• Centax compleet
• Voorraad 1 x In Stock

• 909216
• Adjustable front anti-roll bar blade with ball (male). For Vector all Specs.

• 902283
• Set of 4 steel needles for use with the optional Serpent 950/950R CVD set.
• Voorraad 1 x In Stock

• 902412
• Voorraad 1 x in Stock

• 902420
• Voorraad 1 x In Stock

• 802303
• Voorraad 1 x In Stock

Optional 10mm Centax II spring.

Serpent is pleased to release this new high-grade steel clutch tension spring. Suitable for use with the Centax II clutch system, this spring is longer than the original version by 1mm and therefore stiffer. This allows the user to tighten the clutch for optimal punch from the clutch whilst still having enough space between the coils of the spring to allow the clutch shoe to optimally travel and contact with the bell housing.

• Op Voorraad 2 x In Stock

• 909515
• Voorraad 3 x In Stock

• 808144
• Voorraad 2 x In Stock

• 903137 
• 903137 Serpent Fueltank 125ccm with AFL-lid 903137
• Voorraad 2 x In Stock

• 903218
• Voorraad 2 x In Stock

• 902308 Serpent Pivot pins 3.5 lower rear (2) 902308
• Voorraad 1 x In Stock

• 903354
• Link-set for the Serpent 966, which is mounted below the radio-tray, to create and control a certain amount of flex in the chassis. Included: trackrod steel (2) balljoints (5) pivotball-uni-5.8mm (5) rh-allen-M3x6 (3) special made setscrew-allen M4 to M3x8 (2) setscrew-allen-M3x16 (1 x
• Voorraad 2 x In Stock

• 903316
• 903116 Serpent 903116 Shaft 2-speed 903116 2-Gang Welle
• Voorraad 1 x In Stock

• 902282 voorraad nu 1 x
• Serpent Insert steel CV (2) 902282
  Steel inserts for use with the all new front CV set for the Serpent 950 / 950R. Comes with 2 fastening grubscrews.
• Voorraad 1 x

• Serpent S960 bodymount rear 903130
• Voorraad 3 x

• Serpent Adjustable front anti-roll bar blade (female) 909217

• Serpent driveshaft front [2] 301015
• Voorraad 1 x

• Serpent S960 shocktower carbon front 903110
• Voorraad 4 x Units In stock